OFFICIAL WENCON PARTNER, IMPORTER AND DISTRIBUTOR FOR THE USA

Hi-Temp Coating Yellow

Hi-Temp Coating Yellow
Product info
Wencon Hi-Temp is a high performance two-component, liquid epoxy coating developed for applications in high load areas. It provides a smooth non porous surface, which is resistant to high temperatures, light chemical aggression and wear as well as bi-metallic corrosion. Typical applications are coating of surfaces rebuild after deterioration including repair of lining on inert gas systems, fresh water generators, hot pipes and heating coils, protection of tanks, Scrubber outlets, pumps and valves against chemical and mechanical aggression, corrosion and bi-metallic corrosion.
  •  Good chemical resistance
  •  High temperature and high abrasion resistance
  •  Excellent mechanical wear properties
  •  Strong adhesion to all metal and GRE surfaces
  •  Fully machinable
Wencon Hi-Temp, availabel in two colors: Related products 
PRODUCT NUMBERS PRODUCT NAMES IMPA NO. ISSA NO.
No. 1060 Wencon Hi-Temp, green 0,5 kg (1,1 lb) unit 812346 75.553.13

KEY TECHNICAL DATA

Max temperature +160- +300°C (320 -570°F)
Consistency fluid
Mixing ratio vol. 1:2
Apply with spatula/brush
Potlife at 20°C 20-40 min. mixed in small amounts
Curing time 10-24 hours
Machineability yes
Specific volume 680 cm3 / kg
Dielectric strength 10 KV/mm
PRODUCT NUMBERS PRODUCT NAMES IMPA NO. ISSA NO.
No. 1050 Wencon Hi-Temp, yellow 0,5 kg (1,1 lb) unit 812345 75.553.12