OFFICIAL WENCON PARTNER, IMPORTER AND DISTRIBUTOR FOR THE USA

Scrubber Pipe Repair Kit L-8742
Click Here

SCRUBBER PIPE REPAIR KIT

Scrubber pipework: a new challenge
Scrubber pipework form a new challenge to the shipowners globally following the IMO 2020 emission requirements. The scrubber pipes are primarily constructed using GRP pipes which are resistant to the highly corrosive wash water from the scrubbing process. GRP/GRE pipes do not corrode like metal pipes, but leaks do occur. Most often leaks are seen in the joints, sleeves or flanges, caused not by weakness in the material, but because of tension and vibrations. Wencon UW coating has excellent adhesive qualities to both GRP and metal. The UW coating further excels by adhering and curing in wet and humid conditions. This means a repair on a leak can be initiated immediately after the pressure is removed, and the system can be put back into operation only 6-10 hrs after the repair is completed. The curing time can be significantly reduced if heat is applied during the curing process.

Scrubber Pipe Repair Kit

The Scrubber Pipe repairs are based on our standard and very simple procedure of applying interchanging layers of Coating and Reinforcement Tape. Each kit contains all the products needed to perform two flange repairs. The Wencon UW Coating is a repair solution for Scrubber Pipework, it will adhere and cure in wet and have the scrubber system operating again within 6-8 hrs. after executed repair.

See Application data sheet for scrubber pipe repair

See Application for scrubber outlet protection

See Application data sheet for similar repair on ballast pipes.

  Wencon Scrubber Pipe Repair Kit is available in 3 standard sizes; 8740 GRE Pipe Repair Kit Ø250mm contains 8741 GRE Pipe Repair Kit Ø500mm contains 8742 GRE Pipe Repair Kit Ø1000mm contains
-
+