UW Coating 150ml-5.0oz White (Cartridge)
ITEM 2820:
WENCON UW Coating is an abrasion and corrosion resistant two-component epoxy, that will adhere and cure on dry, wet as well as submerged surfaces. Suitable for touch-up repairs on superstructures and piping in general. 100 % solid and solvent free coating, capable of building up to 500μm thickness in one layer. WENCON UW Coating can be applied on surfaces where it is impossible obtaining a 100 % clean and dry repair area, such as splash-zones as well as underwater. Unique advantages:
- Strong adhesion to all Steel & Metal alloys, GRE FRP, Fiberglas and other composite materials etc.
- High wear resistance
- High temperature resistance
- High coverage rate
- Can be applied on wet surfaces or under water
- Cures under water and on wet surfaces
- Efficient double coat system
- Long pot-life under water
| Product numbers | Product names | Volume | Size |
|---|---|---|---|
| No. 4508 | Wencon UW Coating, yellow | 265ml | 9.5oz |
| No. 4550 | Wencon UW Coating, orange | 1125ml | 38oz |
Key technical data
| Max temperature | +60- +250°C (140-482°F) |
| Consistency | fluid |
| Mixing ratio vol. | 1:2 |
| Apply with | spatula/brush |
| Potlife at 20°C | 20-30 min. mixed in small amounts |
| Curing time | 10-15 hours |
| Machineability | yes |
| Specific volume | 730 cm3 / kg |
| Dielectric strength | 10 KV/mm |
| Product numbers | Product names | Volume | Size |
|---|---|---|---|
| No. 2820 | Wencon UW Coating, white | 150ml | 5oz |