OFFICIAL WENCON PARTNER, IMPORTER AND DISTRIBUTOR FOR THE USA

DESCRIPTION

Wencon Coating S. Ral 9001 white and Ral 7035 Grey. Extreme high build
• Abrasion, heat and chemical resistance
• Strong adhesion to all steel and metal surfaces
• Single and double coat system
• High coverage rate
• Non-electrical leading
• 100% solid, no shrinkage

Wencon Coating S is a solvent free, extreme high build coating, which provides a smooth non-porous surface, resistant to abrasion, high temperatures, chemical aggression, corrosion and erosion as well as impingement.
Wencon Coating S has been developed primarily for the marine, offshore oil and gas industry, but also highly suitable for use in industries such as petrochemical, pulp and paper, metal processing, power generation and sugar plants etc.
Wencon Coating S offers excellent corrosion protection at operating temperature fluctuations from -50°C (-58° F) up to 160°C (320°F). The resistance
to peak temperature is as high as 250°C (482°F). Resistance to chemicals and solvents depends on type, concentration and temperature. The coating is resistant to aqueous solutions, acids and alkalis as well as several aggressive acids and caustics.
Application areas
Typical applications are repairs or pre-production protection of steel and
concrete storage tanks, separators, evaporators, scrubbers, absorbers, heat exchangers, turbines, pipelines and pumps, vessel propulsion areas, rudders and hulls.
Mixing
Wencon Coating S is developed for application using two component hot
airless application spray equipment. Easy mixing ratios (1:2 by volume)
The Coating is supplied in 2 containers as a unit.
Volume: 27,75 Litre ( Component A: 18,5 Litre, Component B 9,25 Litre)

  • Strong adhesion to all steel & metal alloys, GRE etc.
  • High wear resistance
  • High temperature resistance
  • Efficient double coat system
  • High coverage rate
Download
Wencon Coating S Technical Information
Chemical resistance overview – Wencon Coating S

KEY TECHNICAL DATA

Max temperature-50 +250°C (-58 – +482° F)
Consistencyfluid
Mixing ratio vol.1:2
Apply bybrush
Potlife at 20°C20-40 min.   mixed in small amounts
Curing time45-120 min/dust dry. 2-3 hours/tack- free
MachineabilityYes
Specific volume0,79 cm3 / gr
Dielectric strength10 KV/mm
PRODUCT NUMBERSPRODUCT NAMEIMPA NO.ISSA NO.
No. 1080Wencon Coating S, Ral 9001 White 27,75 Ltr (7,33 gal) unitNANA
No. 1081Wencon  Coating, Ral 7035 Grey 27,75 Ltr (7,33 gal) unitNANA