OFFICIAL WENCON PARTNER, IMPORTER AND DISTRIBUTOR FOR THE USA

DESCRIPTION

Under Water Coating, Now on Cartridge

WENCON UW Coating is an abrasion and corrosion resistant two-component epoxy, that will adhere and cure on dry, wet as well as submerged surfaces.
Suitable for touch-up repairs on superstructures and piping in general.
100 % solid and solvent free coating, capable of building up to 500μm thickness in one layer.
WENCON UW Coating can be applied on surfaces where it is impossible obtaining a 100 % clean and dry repair area, such as splash-zones as well as underwater.

Mixing: Component A and Component B are combined in the static mixer nozzle that is screwed on to the cartridge before application can begin.
Discard the first 1 cm, of the product until product is evenly coloured, and begin application.
If the product has cured, replace the nozzle with new static mixer nozzle.

Compatiblility: WENCON UW Coating is in general compatible with other epoxy-polyamide / amine paint & polyurethane coatings. These substrates bond well to each other as long as the surfaces are clean and slightly abraded. If any questions, please contact WENCON for confirmation of compatibility.

  • Strong adhesion to all steel & metal alloys, GRE etc.
  • High wear resistance
  • High temperature resistance
  • High coverage rate
Download
UW Coating Cartridge
UW Coating  MSDS
 

Key technical data

Max temperature-50- +160°C (-58 – 320° F)
Consistencyfluid
Mixing ratio vol.1:2
Apply withspatula/brush
Potlife at 20°C25-35 min. mixed in small amounts
Curing time8-18 hours
Machineabilityyes
Specific volume535 cm3 / kg
Dielectric strength10 KV/mm
Product numberProduct nameIMPA no.ISSA no.
No. 1037Wencon UW Coating orange, CartridgeNANA